Publications

Collagen Networks under Indentation and Compression Behave Like Cellular Solids
C.S. O’Bryan, Y. Ni, C.R. Taylor, T.E. Angelini, K.D. Schulze
Langmuir 40(8), 4228-4235 (2024)

Investigating the Sequence Specific Adsorption Behavior of Polypeptides at the Solid/Liquid Interface
C.S. O’Bryan, T. J. Murdoch, D.J. Strickland, D. Bendejacq, D.Lee, R.J. Composto
Langmuir 39(5), 1740-1749 (2023)

“Electrochemically Deposited Molybdenum Disulfide Surfaces Enable Polymer Adsorption Studies using Quartz Crystal Microbalance with Dissipation Monitoring (QCM-D)”
C.S. O’Bryan, J. Rosenfeld, A. Zhang, A.W. Keller, D. Bendejacq, C.R. Kagan, C.B. Murray, D. Lee, R.J. Composto;
Journal of Colloid and Interface Science 614, 522-531 (2022)

Nanoparticle Dynamics in Hydrogel Networks with Controlled Defects
K.A. Rose, E. Marino, C.S. O’Bryan, C.B. Murray, D. Lee, R.J. Composto;
Soft Matter 18(47), 9045-9056 (2022)

“Microindentation of Cartilage Before and After Articular Loading in a Bioreactor: Assessment of Length-Scale Dependency Using Two Analysis Methods”
C. Yuh, C.S. O’Bryan, T.E. Angelini, M.A. Wimmer;
Experimental mechanics 61(7), 1069-1080 (2021) 

“Capillary forces drive buckling, plastic deformation, and break-up of 3D printed beams”
C.S. O’Bryan, A. Brady-Mine, C.J. Tessmann, A.M. Spotz, T.E. Angelini;
Soft Matter 17(14), 3886-3894 (2021) 

“Mechanical Characterization of Glandular Acini Using a Micro-indentation Instrument”
C.S. O’Bryan, Q. Zhang, T.P. Lele, T.E. Angelini
Bio-protocol 10(23), e3847 (2020) 

“3D Aggregation of Cells in Packed Microgel Media”
C.D. Morley, J. Tordoff, C.S. O’Bryan, R. Weiss, T.E. Angelini
Soft Matter 16(28), 6572-6581 (2020) 

“Hydrogel Compression and Polymer Osmotic Pressure”
A. Bhattacharyya, C.S. O’Bryan, Y. Ni, C.D. Morley, C.R. Taylor, T.E. Angelini
Biotribology 22, 100125 (2020)

“Low Force, High Noise; Isolating Indentation Forces Through Autocorrelation Analysis”
C.S. O’Bryan, K.D. Schulze, T.E. Angelini
Biotribology 20, 100110 (2019) 

“Quantitative Characterization of 3D Bioprinted Structural Elements Under Cell Generated Forces”
C. Morley, S.T Ellison, T. Bhattacharjee, C.S. O’Bryan, Y. Zhang, K. Smith, C.P. Kabb, M. Sebastian, G. Moore, K.D. Schulze, S.R. Niemi, W.G. Sawyer, D. Tran, D. Mitchell, B.S. Sumerlin, C. Flores, T.E. Angelini
Nature communications 10(1), 3029 (2019)

“Anthracene-Based Mechanophores for Compression-Activated Fluorescence in Polymeric Networks”
C.P. Kabb, C.S. O’Bryan, C. Morley, T.E. Angelini, B.S. Sumerlin
Chemical science 10(33), 7702-7708 (2019) 

“Repair of Nuclear Ruptures Requires Barrier-to-Autointegration Factor”
C.T. Halfmann, R.M. Sears, A. Katiyar, B.W. Busselman, L.K. Aman, Q. Zhang, C.S. O’Bryan, T.E. Angelini, T.P. Lele, K.J. Roux
Journal of Cell Biology 218(7), 2136-2149 (2019) 

“Hierarchical Self-Assembly and Emergent Function of Densely Glycosylated Peptide Nanofibers”
A. Restuccia, D.T. Seroski, K.L. Kelley, C.S. O’Bryan, J.J. Kurian, K.R. Knox, S.A. Farhadi, T.E. Angelini, G.A. Hudalla
Communications Chemistry 2(1), 53 (2019)

“Jammed Polyelectrolyte Microgels for 3D Cell Culture Applications: Rheological Behavior with Added Salts”
C.S. O’Bryan, C.P. Kabb, B.S. Sumerlin, T.E. Angelini
ACS Applied Bio Materials 2(4), 1509-1517 (2019) 

“Commercially Available Microgels for 3D Bioprinting”
C.S. O’Bryan, T. Bhattacharjee, S.L. Marshall, W.G. Sawyer, T.E. Angelini
Bioprinting 11, e00037 (2018) 

“Friction-Induced Inflammation”
A.A Pitenis, J.M. Urueña, S.M. Hart, C.S. O’Bryan, S.L. Marshall, P.P. Levings, T.E. Angelini, W.G. Sawyer
Tribology Letters 66, 1-13 (2018) 

“Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing”
C.P. Kabb, C.S. O’Bryan, C.C. Deng, T.E. Angelini, B.S. Sumerlin
ACS applied materials & interfaces 10(19), 16793-16801 (2018) 

“Polyelectrolyte Scaling Laws for Microgel Yielding Near Jamming”
T. Bhattacharjee, C.P. Kabb, C.S. O’Bryan, J.M. Urueña, B.S. Sumerlin, W.G. Sawyer, T.E. Angelini
Soft matter 14(9), 1559-1570 (2018) 

“In Situ Measurements of Contact Dynamics in Speed-dependent Hydrogel Friction”
E.O. McGhee, A.A. Pitenis, J.M Urueña, K.D. Schulze, A.J. McGhee, C.S. O’Bryan, T. Bhattacharjee, T.E. Angelini, W.G. Sawyer
Biotribology 13, 23-29 (2018) 

“Eliminating the Surface Location from Soft Matter Contact Mechanics Measurements”
M. Garcia, K.D. Schulze, C.S. O’Bryan, T. Bhattacharjee, W.G. Sawyer, T.E. Angelini
Tribology-Materials, surfaces & interfaces 11(4), 187-192 (2017) 

“3D Printing with Sacrificial Materials for Soft Matter Manufacturing”
C.S. O’Bryan, T Bhattacharjee, S.R. Niemi, S. Balachandar, N. Baldwin, S.T. Ellison, C.R. Taylor, W.G. Sawyer, T.E. Angelini
MRS bulletin 42(8), 571-577 (2017) 

“Polymer Osmotic Pressure in Hydrogel Contact Mechanics”
K.D. Schulze, S.M. Hart, S.L. Marshall, C.S. O’Bryan, J.M. Urueña, A.P. Pitenis, W.G. Sawyer, T.E. Angelini
Biotribology 11, 3-7 (2017) 

“Spherically Capped Membrane Probes for Low Contact Pressure Tribology”
S.L. Marshall, K.D. Schulze, S.M. Hart, J.M. Urueña, E.O. McGhee, A.I. Bennett, A.P. Pitenis, C.S. O’Bryan, T.E. Angelini, W.G. Sawyer
Biotribology 11, 69-72 (2017) 

“Self-Assembled Micro-Organogels for 3D Printing Silicone Structures”
C.S. O’Bryan, T. Bhattacharjee, S. Hart, C.P. Kabb, K.D. Schulze, I. Chilakala, B.S. Sumerlin, W.G. Sawyer, T.E. Angelini
Science advances 3(5), e1602800 (2017) 

“Liquid-like solids support cells in 3D”
T. Bhattacharjee, C.J. Gil,S.L. Marshall, J.M. Urueña, C.S. O’Bryan, M. Carstens, B. Keselowsky, G.D. Palmer, S. Ghivizzani, C.P. Gibbs, W.G. Sawyer, T.E. Angelini
ACS Biomaterials Science & Engineering 2(10), 1787-1795 (2016)